Home / Furniture Fit Calculator

Furniture Fit Calculator: will it fit through your doors and hallways?

Enter the size of your furniture or appliance and the openings on its route. The calculator tries every way of carrying it, keeps a margin for hands and door frames, and tells you when something fits on paper but would be hard to move. It is a screening check, not a guarantee.

How the check works

An item passes an opening with one dimension travelling through it, and the other two forming a cross-section that has to fit the opening's width and height. A sofa carried end-first has its height and depth as the cross-section; carried on its side, its depth and length. The calculator tries all six combinations, keeps the one with the most spare room, and reports the item's limiting measurement if none works.

Fits on paper is not the same as fits

  • Clearance. Fingers, door frames and walls need room. The calculator asks for 1 inch (2.5 cm) on each side by default, and calls anything between zero and your margin "tight".
  • Tilting. Some flat items pass an opening only when angled across its diagonal. The tool detects this and labels it "only by tilting", because it leaves almost no margin and risks damage.
  • Corners. Turning a long item between two hallways is harder than passing a straight opening. The tool simulates a flat rectangle pivoting around a 90° corner, with each dimension in turn kept upright, and reports whether it can turn with and without your clearance.
  • What it cannot see. Door swings, handrails, stair pitch and landings, light fixtures, narrowing at corners, and anything you did not enter.

Worked example

A sofa measuring 34 × 84 × 36 in (height × width × depth) has a smallest cross-section of 34 × 36 in. Through a 32 in wide door it does not fit. A 36 in door leaves 2 in of spare width in total, exactly 1 in per side, which meets the default margin. A 35 in door leaves 1 in in total, so the sofa is "tight". Between two 36 in hallways the sofa cannot turn the corner when carried flat, because its 84 in length needs more room than a 36 in corridor gives.

Measuring well

Measure your furniture at its widest, tallest and deepest points, including feet, handles and trim. Measure openings at their narrowest point, such as the clear space between the door stops with the door open to 90°. Taking the door off its hinges adds roughly the door's thickness. Measure hallways and stairs including railings and baseboards, and the lowest overhead point.

If it does not fit

Look for removable parts (legs, doors, cushions, headboards), a different route (a wider door, a window or balcony), or whether professional movers can disassemble it. If an item truly cannot make the trip, decide early whether to sell it or store it.

Related tools

List the items you are keeping in the Moving Volume Calculator, number your boxes with the Moving Box Inventory, and pick a vehicle with the Moving Truck Size Calculator.

Typical sizes in the preset list (mattress sizes, a typical sofa, refrigerator, washer and bookcase) are examples to get you started, not manufacturer specifications. Always measure your own item.

Frequently asked questions

Will a sofa fit through a standard door?

It depends on the sofa. Many standard interior doors are around 30–32 in wide, which is too narrow for some sofas but fine for others carried on end or side. Enter your sofa and door measurements for a specific answer.

Why does the calculator say "tight" when the item fits mathematically?

Because zero spare room is not realistic. Hands, door frames and the item itself all need space, so the tool warns when the margin is below the clearance you chose.

Does it check stairs?

It checks the stair width and headroom as an opening. It does not model the pitch, landings or banisters, so treat stair results as a first screening and measure the turn separately.

Can the tool guarantee my furniture will fit?

No. A "likely to fit" result only means the measurements you entered leave room. Check heavy, fragile or very large items on site.

Is my data saved?

Your item and access-point measurements stay in your browser (localStorage) so they are still there when you return. Nothing is sent to a server.

Next: Storage Unit Size Calculator

More free tools